Features:

1. Super wear-resistant

The product adopts the new technology and special process of dual-phase tungsten-titanium material. It can maintain normal use under more than 10,000 pressure switch cycles in drilling conditions, and the product service life can reach 5,000 hours or more.

2. Low torque switch

When the pressure difference between the two ends is 35MPa, the opening torque is ≤350N·m; when the pressure difference between the two ends is 60MPa, the opening torque is ≤1000N·m.

3. Corrosion resistance

After the finished valve ball and valve seat are placed in vacuum special equipment, a layer of low-torque material is compositely infiltrated to enhance the surface finish, enhance the self-lubrication and anti-corrosion ability of the surface (According to NACE MR0175, it can resist H2S corrosion above EE level), and can reduce the IBOP rotation torque by multiples, improve the wear resistance and corrosion resistance of the valve ball and valve seat surface, and greatly improve the product life.

4. High pressure resistance

Yinhe IBOP can meet the different operating pressure requirements of 10,000Psi and 15000Psi. At the same time, the 20,000Psi IBOP developed by our company has been successfully used in the drilling operation of the deepest well in Asia-Tako 1 well.

5. Low maintenance cost

As a consumable part, if one of the upper and lower IBOPs is damaged, the upper or lower IBOP can be replaced separately to reduce operating costs.

6. Interchangeable and compatible

It can be matched and interchanged with the top drive IBOPs of most brands in the world, and perfectly matches the top drives of NOV, CANRIG, TESCO, MH, BENTEC, DRILLMEC, BPM, JH, TPEC, HH, ZPEC and other brands.

7. Support customization

Product parameters-(taking φ187mm IBOP as an example)